Line voltage wiring connects the lighting controllers and the luminaires. The numbers types and locations of exits or access to exits shall be provided in the uses described in sections 1006221 through 1006226.
1006221 boiler incinerator and furnace rooms.
Electrical room lighting control. 100622 egress based on use. So long as there is a mechanism that allows you to override any automatic features and to keep the lights on while you are working you will satisfy this requirement. Other forms of lighting control include occupancy sensors daylight sensors clock switches a variety of manual and automatic dimming devices and centralized controls.
Because many electrical contractors often find themselves in the role as lighting and control system designer they should be aware of their applicable energy codes and offer code compliance as part of this service. The most common form of electric lighting control is the onoff toggle switch. The cpi lighting control system manages interior andor exterior lighting loads based on a time of day schedule andor an.
Ibc 10 1 electrical room requirements. Lutron is the leader in the lighting control industry and offers a wide selection of energy saving dimmers and lighting control solutions. On one point all energy codes agree.
Lighting control in electrical equipment rooms i think the intent is to prevent the lights from going off while you are working in the room. And 2 3 dimming outputs for dimming. All departments auto tire baby beauty books cell phones clothing electronics food.
In some industries lighting accounts for more than 60 of a facilitys electrical bill and 40 of the total energy bill. 2 3 relays for switching. Typically ethernet cabling connects switches and sensors to the controller.
The cpi lighting control system lcs is designed and manufactured by cpi to supply our customers with a cost effective quality easy to install lighting controls solution. Some controls operate on line voltage power while others are low voltage dc powered. Given the amount of change that occurs in buildings over their lifespan extra wall space should always be provided in these rooms for future equipment.
The majority of room lighting controllers feature manual switch occupancy and light sensor inputs. In multistory buildings these spaces should be stacked. Lighting controls are mandatory to eliminate waste and save energy.
Lighting control system panels and devices and other electrical system devices are sometimes also located in these rooms. Lighting control ranges from simple wall switches to complex dimming systems networked with other systems.